ab.com コミュニティ

'hEditはグローバル変数
Sub MainWnd_IDM_NEW_MenuClick()
	Dim cancel As Integer
	If fChanged Then
		' 保存するかユーザーに訊く。
        Dim ret As Long
        ret = MessageBox(hMainWnd, "内容が変更されています。保存しますか？", "AppendMissionEditor", MB_YESNOCANCEL or MB_ICONEXCLAMATION)
        Select Case ret
            Case IDYES
                file_OverWrite()

                'hEditとファイルパスの初期化
                file_path=""
                SetWindowText(hEdit,"")

                fChanged=0
            Case IDNO
                'hEditとファイルパスの初期化
                file_path=""
                SetWindowText(hEdit,"")

                fChanged=0
            Case IDCANCEL
                cancel = 0
        End Select
    End If

    file_path=""
    SetDlgItemText(hMainWnd,EditBox1,NULL)
    NameFile=""
    SetWindowText(hMainWnd,"新規アペンドミッション - AppendMissionEditor")
    fChanged=0
End Sub

コンパイル、デバッグともひかかりませんが、実行したときにEditBox1が空になりません。間違ってはいないと思うのですが、なぜでしょう？

説明不足だと思うので現状を書いておきます。

ファイルを開いてEditBox1に文字列をセットした後、新規作成を押すと一番上の行の文字列が全部消える。
それで、2行目からの文字列はEditBoxに残ったまま。
UpdateWindowで直るかと思ってやってみたができなかった。
文字色を変更するために、ちょっとProcのところを弄ってますけど、そんなに間違いはないと思います。

説明とコードが足りないと思ったので、コードを転載しておきます。

MainWndの全て [ここをクリックすると内容が表示されます]

コード: 全て選択

'-----------------------------------------------------------------------------
'  イベント プロシージャ
'-----------------------------------------------------------------------------
' このファイルには、ウィンドウ [MainWnd] に関するイベントをコーディングします。
' ウィンドウ ハンドル: hMainWnd

' TODO: この位置にグローバルな変数、構造体、定数、関数を定義します。
Declare Function GetLongPathName Lib "kernel32" Alias "GetLongPathNameA" (lpszShortPath As String,lpszLongPath As String,cchBuffer As Long) As Long
Declare Function PathGetArgs Lib "shlwapi" Alias "PathGetArgsA" (psz As BytePtr) As BytePtr
Declare Function CreateMutex Lib "kernel32" Alias "CreateMutexA" (lpMutexAttributes As VoidPtr, bInitialOwner As Long, lpName As String) As Long

Sub SetTbButtonData(ByRef ptb As TBBUTTON, iBitmap As Long, idCommand As Long, fsState As Byte, fsStyle As Byte)
    'ptb（TBBUTTON構造体）にボタン情報を格納する
    With ptb
        .iBitmap=iBitmap
        .idCommand=idCommand
        .fsState=fsState
        .fsStyle=fsStyle
        .dwData=0
        .iString=0
    End With
End Sub

Const ID_TOOLBAR = 70    'ツールバーのID
Dim hToolbar As DWord    'ツールバーのハンドル
Dim hImageList As DWord  'イメージリストのハンドル

Const ID_STATUS = 71
Dim hStatus As DWord

Dim file_path As String

Dim FileName[MAX_PATH-1] As Byte
Dim ofn As OPENFILENAME'OPENFILENAME型構造体の宣言
    'グローバル領域に整数型変数cntを宣言
Dim cnt=0 As Long

Sub RefreshExt()
Dim hKey As HKEY
Dim udtMenuItemInfo As MENUITEMINFO
    With udtMenuItemInfo
        .cbSize=44
        .fMask=MIIM_STATE

        If RegOpenKeyEx(HKEY_CLASSES_ROOT As HKEY,"AppendMissionFile",0,KEY_QUERY_VALUE,hKey)=ERROR_SUCCESS Then
            RegCloseKey(hKey)
            .fState=MFS_CHECKED
        Else
            .fState=MFS_UNCHECKED
        End If
      End With
End Sub

Dim fChanged As Long

Dim hFont As HFONT
hFont=CreateFont(-12,0,0,0,400,0,0,0,128,3,2,1,50,"ＭＳ Ｐゴシック")

Sub AddEditBoxText(ByVal hDlg As HWND,ByVal nIDDlgItem As Long,ByVal lpString As BytePtr)
Dim hEdit As HWND
    hEdit=GetDlgItem(hDlg,nIDDlgItem)
    SendMessage(hEdit,EM_SETSEL,GetWindowTextLength(hEdit),-1)
    SendMessage(hEdit,EM_REPLACESEL,TRUE,lpString As LPARAM)
    SetFocus(hEdit)
End Sub

Function GetWindowTextStr(hwnd As HWND, ByRef str As String) As Long
    Dim Length As Long
    Length = GetWindowTextLength(hwnd)
    str = ZeroString(Length)
    If Length = 0 Then
        GetWindowTextStr = 0
        Exit Function
    End If
    GetWindowTextStr = GetWindowText(hwnd, StrPtr(str), Length + 1)
    SetDWord(StrPtr(str) - SizeOf (DWord), GetWindowTextStr)
End Function

Function GetDlgItemTextStr(hDlg As HWND, idDlgItem As Long, ByRef str As String) As Long
    GetDlgItemTextStr = GetWindowTextStr(GetDlgItem(hDlg, idDlgItem), str)
End Function

Function GetListBoxStr(hLB As HWND, pos As Long, ByRef str As String) As Long
    Dim Length As Long
    Length = SendMessage(hLB,LB_GETTEXTLEN,pos,0)
    str = ZeroString(Length)
    If Length = 0 Then
        GetListBoxStr = 0
        Exit Function
    End If
    GetListBoxStr = SendMessage(hLB,LB_GETTEXT,pos,StrPtr(str))
    SetDWord(StrPtr(str) - SizeOf (DWord), GetListBoxStr)
End Function

Function GetDlgLisBoxStr(hDlg As HWND, idLB As Long, pos As Long, ByRef str As String) As Long
    GetDlgLisBoxStr = GetListBoxStr(GetDlgItem(hDlg, idLB), pos, str)
End Function

Sub DestroyObjects()
    DeleteObject(hFont_Combo)
End Sub

Function GetFileName(Name As String) As String
	If Name="" then Exit Sub
	Dim i As Long
	Dim j As Long
	Dim Ret(1023) As Byte
	For i=Len(Name)-1 To 0 Step -1
		If Name(i)=Asc("/") then Exit For
		If Name(i)=Asc("\") then Exit For
	Next i
	i+=1
	j=0
	Do
		Ret(j)=Name(i+j)
		If i+j=Len(Name)-1 then Exit Do
		j+=1
	Loop
	GetFileName=Ret
End Function

Dim NameFile As String
Dim rgb As DWord
Dim hEdit As HWND

' ウィンドウメッセージを処理するためのコールバック関数

Function MainWndProc(hWnd As DWord, dwMsg As DWord, wParam As DWord, lParam As DWord) As DWord
	' TODO: この位置にウィンドウメッセージを処理するためのコードを記述します。

	Select Case dwMsg
        Case WM_CTLCOLOREDIT
            If lParam=GetDlgItem(hMainWnd,EditBox1) Then
                ' カラー選択ダイアログで取得した色を文字色にする
                SetTextColor(wParam As HDC,rgb)
                UpdateWindow(GetDlgItem(hMainWnd,EditBox1))
                Exit Function
            End If
    End Select

	' イベントプロシージャの呼び出しを行います。
	MainWndProc=EventCall_MainWnd(hWnd,dwMsg,wParam,lParam)
End Function

'-----------------------------------------------------------------------------
' ここから下は、イベントプロシージャを記述するための領域になります。

Sub MainWnd_Destroy()
    'イメージリストを破棄
    ImageList_Destroy(hImageList)

    AppendMissionEditor_DestroyObjects()
    PostQuitMessage(0)
End Sub

Sub MainWnd_EditBox1_Change()
	fChanged=1
	EnableMenuItem(GetMenu(hMainWnd),IDM_SAVE,MF_ENABLED)
    
    Dim buffer[255] As Byte	
	wsprintf(buffer,"サイズ:　%d　バイト",GetWindowTextLength(GetDlgItem(hMainWnd,EditBox1)))
	SendMessage(hStatus, SB_SETTEXT, 2, buffer)
End Sub

Sub TextSet(path As BytePtr)    'ファイルを開きエディトボックスにセットする関数
    Dim hFile As VoidPtr           'ファイルハンドル
    Dim FileSize As Long         'ファイルサイズ
    Dim buffer As BytePtr        'バッファポインタ
    Dim dwAccessByte As DWord
    '変数pathにファイルパスが格納される

    'ファイルを開く
    hFile=CreateFile(path, GENERIC_READ, FILE_SHARE_READ or FILE_SHARE_WRITE, 
                     ByVal 0, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, 0)

    'ファイルを開けなかったとき
    If hFile=INVALID_HANDLE_VALUE Then
        MessageBox(hMainWnd,"ファイルオープンに失敗","エラー",MB_OK or MB_ICONEXCLAMATION) 'ここではじかれます。
        Exit Sub
    End If

    'ファイルサイズを取得し、バッファを確保する
    FileSize=GetFileSize(hFile,0)
    buffer=calloc(FileSize+1)

    'ファイルの読み込み
    ReadFile(hFile,buffer,FileSize,VarPtr(dwAccessByte),ByVal 0)
    buffer[dwAccessByte]=0

    'ファイルをクローズ
    CloseHandle(hFile)

    'テキストバッファをエディットボックスにセットする
    SetDlgItemText(hMainWnd,EditBox1,buffer)

    'バッファを解放する
    free(buffer)

    Dim Title$ As String
	Dim buf(1023) As Byte
	Dim i As Long,j As Long
	For i=0 To 1023
		If FileName(i)=0 then Exit For
		buf(i)=FileName(i)
	Next i
	NameFile=ZeroString(i)
	For j=0 To i-1
		NameFile(j)=buf(j)
	Next j
	Dim FileTopName As String
	FileTopName=GetFileName(NameFile)
	Title$=FileTopName+" - AppendMissionEditor"
	If FileTopName="" then
		Title$="新規アペンドミッション - AppendMissionEditor"
	End If
	SetWindowText(hMainWnd,Title$)
End Sub

Sub MainWnd_Create(ByRef CreateStruct As CREATESTRUCT)
	Dim hEdit As HWND
    Dim ic As INITCOMMONCONTROLSEX
    Dim tbb[12] As TBBUTTON
    Dim hCombo As HWND
    Dim hCombo2 As HWND
    
    CreateMutex(0,0,"AppendMissionEditor")
    If GetLastError()=183 Then
        MessageBox(0,"このプログラムは二重起動できません。","エラー",MB_ICONEXCLAMATION)
        End
    End If

    hEdit=GetDlgItem(hMainWnd,EditBox1)
    hCombo=GetDlgItem(hMainWnd,ComboBox1)
    hCombo2=GetDlgItem(hMainWnd,ComboBox2)

    SendMessage(hCombo,CB_INSERTSTRING,0,"戦闘機")
    SendMessage(hCombo,CB_INSERTSTRING,1,"小型爆撃機")
    SendMessage(hCombo,CB_INSERTSTRING,2,"大型爆撃機")
    SendMessage(hCombo,CB_INSERTSTRING,3,"輸送機")
    SendMessage(hCombo,CB_INSERTSTRING,4,"艦船")
    SendMessage(hCombo,CB_INSERTSTRING,5,"地上部隊")
    SendMessage(hCombo,CB_INSERTSTRING,6,"地上物")
    SendMessage(hCombo,CB_INSERTSTRING,7,"SetName")
    SendMessage(hCombo,CB_INSERTSTRING,8,"シェア使用可能")
    
    SendMessage(hCombo2,CB_INSERTSTRING,0,"大日本帝国")
    SendMessage(hCombo2,CB_INSERTSTRING,1,"アメリカ合衆国")
    SendMessage(hCombo2,CB_INSERTSTRING,2,"ドイツ第三帝国")
    SendMessage(hCombo2,CB_INSERTSTRING,3,"イギリス王国")
    SendMessage(hCombo2,CB_INSERTSTRING,4,"ソビエト連邦")
    SendMessage(hCombo2,CB_INSERTSTRING,5,"イタリア王国")
    SendMessage(hCombo2,CB_INSERTSTRING,6,"その他の国")
    SendMessage(hCombo2,CB_INSERTSTRING,7,"全て表示")

    SendDlgItemMessage(hMainWnd,CommandButton5,BM_SETSTYLE,BS_DEFPUSHBUTTON or BS_NOTIFY,1)
    
    fChanged=0 

    'コモンコントロールの初期化
    ic.dwSize=Len(ic)
    ic.dwICC=ICC_BAR_CLASSES
    InitCommonControlsEx(ic)

    'ボタン情報をセット
    SetTbButtonData(tbb[0],0,IDM_NEW,TBSTATE_ENABLED,TBSTYLE_BUTTON)
    SetTbButtonData(tbb[1],1,IDM_OPEN,TBSTATE_ENABLED,TBSTYLE_BUTTON)
    SetTbButtonData(tbb[2],2,IDM_SAVE,TBSTATE_ENABLED,TBSTYLE_BUTTON)
    SetTbButtonData(tbb[3],3,IDM_FILEOVERWRITE,TBSTATE_ENABLED,TBSTYLE_BUTTON)
    SetTbButtonData(tbb[4],0,0,TBSTATE_ENABLED,TBSTYLE_SEP)
    SetTbButtonData(tbb[5],4,IDM_CUT,TBSTATE_ENABLED,TBSTYLE_BUTTON)
    SetTbButtonData(tbb[6],5,IDM_COPY,TBSTATE_ENABLED,TBSTYLE_BUTTON)
    SetTbButtonData(tbb[7],6,IDM_PASTE,TBSTATE_ENABLED,TBSTYLE_BUTTON)
    SetTbButtonData(tbb[8],7,IDM_UNDO,TBSTATE_ENABLED,TBSTYLE_BUTTON)
    SetTbButtonData(tbb[9],0,0,TBSTATE_ENABLED,TBSTYLE_SEP)
    SetTbButtonData(tbb[10],8,IDM_SENDMAIL,TBSTATE_ENABLED,TBSTYLE_BUTTON)
    SetTbButtonData(tbb[11],0,0,TBSTATE_ENABLED,TBSTYLE_SEP)
    SetTbButtonData(tbb[12],9,IDM_ABOUT,TBSTATE_ENABLED,TBSTYLE_BUTTON)

    'ツールバーを生成
    hToolbar=CreateToolbarEx(hMainWnd, _
        WS_CHILD or WS_VISIBLE or TBSTYLE_TOOLTIPS, _
        ID_TOOLBAR, _
        10, _                        'ビットマップの個数
        GetModuleHandle(0), _
        IDB_BITMAP1, _              'ビットマップのリソースID
        tbb, _
        13, _                        'ボタンの個数
        0,0, _                      'ボタンサイズ（0指定で自動セットに）
        16,15, _                    'ビットマップサイズ
        Len(tbb[0]))

    'ウィンドウスタイルにTBSTYLE_FLATを追加
    Dim style As Long
    style=GetWindowLong(hToolbar,GWL_STYLE)
    style=style or TBSTYLE_FLAT
    SetWindowLong(hToolbar,GWL_STYLE,style)

    'イメージリストを作成（フルカラー）
    hImageList=ImageList_LoadImage(GetModuleHandle(0), _
        IDB_BITMAP2, _
        16, 0, RGB(192,192,192), _
        IMAGE_BITMAP,LR_CREATEDIBSECTION)

    'ホットイメージを設定
    SendMessage(hToolbar, TB_SETHOTIMAGELIST, 0, hImageList)

    hStatus = CreateStatusWindow( _
              WS_CHILD or WS_VISIBLE or CCS_BOTTOM or SBARS_SIZEGRIP, _
              NULL, _
              hMainWnd, _
              ID_STATUS)

    'MainWndを画面の真ん中に移動
    Dim MainWndRect As RECT
    GetWindowRect(hMainWnd, MainWndRect)
    SetWindowPos(hMainWnd, 0,_
    (GetSystemMetrics(SM_CXSCREEN) - MainWndRect.right + MainWndRect.left) \ 2,_
    (GetSystemMetrics(SM_CYSCREEN) - MainWndRect.bottom + MainWndRect.top) \ 2,_
    0, 0, SWP_NOSIZE or SWP_NOZORDER)

    SendDlgItemMessage(hMainWnd,ComboBox1,WM_SETFONT,hFont,0)
    SendDlgItemMessage(hMainWnd,ComboBox2,WM_SETFONT,hFont,0)
    SendDlgItemMessage(hMainWnd,ListBox1,WM_SETFONT,hFont,0)
    SendDlgItemMessage(hMainWnd,EditBox2,WM_SETFONT,hFont,0)
    SendDlgItemMessage(hMainWnd,CommandButton1,WM_SETFONT,hFont,0)
    SendDlgItemMessage(hMainWnd,CommandButton2,WM_SETFONT,hFont,0)
    SendDlgItemMessage(hMainWnd,CommandButton3,WM_SETFONT,hFont,0)
    SendDlgItemMessage(hMainWnd,CommandButton4,WM_SETFONT,hFont,0)
    SendDlgItemMessage(hMainWnd,CommandButton5,WM_SETFONT,hFont,0)

    EnableMenuItem(GetMenu(hMainWnd),IDM_SAVE,MF_GRAYED)

    Dim Sbuffer As String
    Dim hTop As Long
    Dim hEnd As Long
    Dim path As BytePtr

    Sbuffer=GetCommandLine()
    hTop=InStr(hTop,Sbuffer,Ex"\q")+3
    hEnd=InStr(hTop,Sbuffer,Ex"\q")

    '本体
    Open Mid$(Sbuffer,hTop,hEnd-hTop) As #1 
    Input #1, path
    
    If path = "" Then
        Exit Sub
    End If

    TextSet(path As BytePtr)
End Sub

Sub MainWnd_Resize(SizeType As Long, cx As Integer, cy As Integer)
	Dim Statusbar_Sizes[2] As Long
	
	Statusbar_Sizes[0]=cx-300
	Statusbar_Sizes[1]=cx-150
    Statusbar_Sizes[2]=cx
    SendMessage(hStatus,SB_SETPARTS,3,Statusbar_Sizes)

    Dim Title$ As String
	Dim FileTopName As String
	FileTopName=GetFileName(FileName)
	Title$=FileTopName+" - AppendMissionEditor"
	If FileTopName="" then
		Title$="新規アペンドミッション - AppendMissionEditor"
	End If
	SetWindowText(hMainWnd,Title$)
End Sub

Sub file_OverWrite()
    Dim hEdit As HWND
    Dim hFile As HFILE
    Dim pStr As BytePtr
    Dim length As DWord
    Dim dwAccessByte As DWord

    hEdit=GetDlgItem(hMainWnd,EditBox1)
    length=GetWindowTextLength(hEdit)+1
    pStr=calloc(length)
    GetWindowText(hEdit,pStr,length)

    If file_path[0]=0 Then
        Dim buffer As String
        '名前をつけて保存
        'OPENFILENAME構造体の初期化
        FillMemory(VarPtr(ofn),Len(ofn),0)
        ofn.lStructSize=Len(ofn)
        ofn.hwndOwner=hMainWnd
        ofn.lpstrFilter=Ex"AppendMissionFiles\0*.apm\0テキストファイル\0*.txt\0すべてのファイル(*.*)\0*\0\0"
        ofn.nFilterIndex=1
        ofn.lpstrFile=FileName
        ofn.nMaxFile=MAX_PATH
        ofn.lpstrTitle="ファイルの保存"
        ofn.Flags=OFN_FILEMUSTEXIST or OFN_HIDEREADONLY or OFN_PATHMUSTEXIST or OFN_EXPLORER or OFN_NOCHANGEDIR or OFN_OVERWRITEPROMPT
        ofn.lpstrDefExt="*"

        '「ファイルの保存」ダイアログ ボックスを表示
        If GetSaveFileName(ofn)=FALSE Then Exit Sub

        'EditBox1のハンドルを取得
        hEdit=GetDlgItem(hMainWnd, EditBox1)

        'テキスト データを格納するためのバッファ領域を確保
        length=GetWindowTextLength(hEdit)
        buffer=ZeroString(length+1)

        'テキスト バッファを取得
        GetWindowText(hEdit, buffer, length+1)

        'OPENFILENAME構造体のDWORD型変数lStructSizeにOPENFILENAME構造体の大きさを代入
        ofn.lStructSize=SizeOf(OPENFILENAME)

        '一度にOPENFILENAME構造体を弄りたい場合はWith文が便利
        With ofn'構造体の変数名を指定
        .lStructSize=SizeOf(OPENFILENAME)
        .hwndOwner=hMainWnd
        End With

        '----------------
        ' ファイルへ保存
        '----------------
        hFile=CreateFile(ofn.lpstrFile, GENERIC_WRITE, 0, _
                     ByVal 0, CREATE_ALWAYS, FILE_ATTRIBUTE_NORMAL, 0)
        If hFile=INVALID_HANDLE_VALUE Then
            MessageBox(hMainWnd,"ファイルオープンに失敗","AppendMissionEditor",MB_OK or MB_ICONEXCLAMATION)
            Exit Sub
        End If

        file_path=ofn.lpstrFile

        '書き込む
        WriteFile(hFile,buffer,length,VarPtr(dwAccessByte),ByVal 0)

        'ファイル ハンドルを閉じる
        CloseHandle(hFile)
    Else
        '上書き
        hFile=CreateFile(file_path,GENERIC_WRITE,NULL,ByVal 0, _
                CREATE_ALWAYS,FILE_ATTRIBUTE_NORMAL,NULL)
        If hFile<>INVALID_HANDLE_VALUE Then
            WriteFile(hFile,pStr,length-1,VarPtr(dwAccessByte),ByVal 0)
            CloseHandle(hFile)
        Else
            MessageBox(hMainWnd,"ファイルオープンに失敗",
            "AppendMissionEditor",MB_OK or MB_ICONEXCLAMATION)
        End If
    End If
    free(pStr)
    fChanged=0
End Sub

Sub MainWnd_ComboBox1_SelChange()
	Dim Data As String
	Dim data As String
	Dim hList As HWND

	GetDlgItem(hMainWnd,ListBox1)

	GetDlgItemTextStr(hMainWnd,ComboBox2,data)
	GetDlgItemTextStr(hMainWnd,ComboBox1,Data)
	If data="大日本帝国" Then
			Select Case Data
				Case "戦闘機"
					SendMessage(hList,LB_RESETCONTENT,0,0)
					SendMessage(hList,LB_INSERTSTRING,0,"TYPE97")
					SendMessage(hList,LB_INSERTSTRING,1,"TYPE1")
					SendMessage(hList,LB_INSERTSTRING,2,"ZERO21")
					SendMessage(hList,LB_INSERTSTRING,3,"SHOKI")
					SendMessage(hList,LB_INSERTSTRING,4,"TORYU")
					SendMessage(hList,LB_INSERTSTRING,5,"GEKKO")
					SendMessage(hList,LB_INSERTSTRING,6,"HIEN")
					SendMessage(hList,LB_INSERTSTRING,7,"ZERO52")
					SendMessage(hList,LB_INSERTSTRING,8,"SIDEN")
					SendMessage(hList,LB_INSERTSTRING,9,"RAIDEN")
					SendMessage(hList,LB_INSERTSTRING,10,"HAYATE")
					SendMessage(hList,LB_INSERTSTRING,11,"SHOKI2")
					SendMessage(hList,LB_INSERTSTRING,12,"JINPU")
					SendMessage(hList,LB_INSERTSTRING,13,"TENRAI")
					SendMessage(hList,LB_INSERTSTRING,14,"SIDEN21")
					SendMessage(hList,LB_INSERTSTRING,15,"TYPE5")
					SendMessage(hList,LB_INSERTSTRING,16,"REPPU")
					SendMessage(hList,LB_INSERTSTRING,17,"KI83")
					SendMessage(hList,LB_INSERTSTRING,18,"SINDEN")
					SendMessage(hList,LB_INSERTSTRING,19,"SHUSUI")
				Case "小型爆撃機"
					SendMessage(hList,LB_RESETCONTENT,0,0)
					SendMessage(hList,LB_INSERTSTRING,0,"T97TB")
					SendMessage(hList,LB_INSERTSTRING,1,"T99SB")
					SendMessage(hList,LB_INSERTSTRING,2,"SUISEI")
					SendMessage(hList,LB_INSERTSTRING,3,"TENZAN")
					SendMessage(hList,LB_INSERTSTRING,4,"GINGA")
					SendMessage(hList,LB_INSERTSTRING,5,"RYUSEI")
					SendMessage(hList,LB_INSERTSTRING,6,"KI102")
				Case "大型爆撃機"
					SendMessage(hList,LB_RESETCONTENT,0,0)
					SendMessage(hList,LB_INSERTSTRING,0,"T96LA")
					SendMessage(hList,LB_INSERTSTRING,1,"T97HB")
					SendMessage(hList,LB_INSERTSTRING,2,"Betty")
					SendMessage(hList,LB_INSERTSTRING,3,"Hiryu")
					SendMessage(hList,LB_INSERTSTRING,4,"RENZAN")
				Case "輸送機"
					SendMessage(hList,LB_RESETCONTENT,0,0)
					SendMessage(hList,LB_INSERTSTRING,0,"Type0TP")
				Case "艦船"
					SendMessage(hList,LB_RESETCONTENT,0,0)
					SendMessage(hList,LB_INSERTSTRING,0,"TBoat")
					SendMessage(hList,LB_INSERTSTRING,1,"Destroyer")
					SendMessage(hList,LB_INSERTSTRING,2,"Cruiser")
					SendMessage(hList,LB_INSERTSTRING,3,"BattleShip")
					SendMessage(hList,LB_INSERTSTRING,4,"Carrier")
					SendMessage(hList,LB_INSERTSTRING,5,"LCarrier")
					SendMessage(hList,LB_INSERTSTRING,6,"OilTanker")
					SendMessage(hList,LB_INSERTSTRING,7,"TroopShip")
					SendMessage(hList,LB_INSERTSTRING,8,"AACruiser")
					SendMessage(hList,LB_INSERTSTRING,9,"Dreadnaught")
				Case "地上部隊"
					SendMessage(hList,LB_RESETCONTENT,0,0)
					SendMessage(hList,LB_INSERTSTRING,0,"HA")
					SendMessage(hList,LB_INSERTSTRING,0,"CHIHA")
					SendMessage(hList,LB_INSERTSTRING,0,"HONI")
					SendMessage(hList,LB_INSERTSTRING,0,"CHIHE")
					SendMessage(hList,LB_INSERTSTRING,0,"CHINU")
					SendMessage(hList,LB_INSERTSTRING,0,"FTC")
					SendMessage(hList,LB_INSERTSTRING,0,"Track")
					SendMessage(hList,LB_INSERTSTRING,0,"LRC")
					SendMessage(hList,LB_INSERTSTRING,0,"JPinf")
				Case "地上物"
					SendMessage(hList,LB_RESETCONTENT,0,0)
					SendMessage(hList,LB_INSERTSTRING,0,"AAC")
					SendMessage(hList,LB_INSERTSTRING,1,"AirPort")
					SendMessage(hList,LB_INSERTSTRING,2,"WatchTower")
					SendMessage(hList,LB_INSERTSTRING,3,"WatchTower2")
					SendMessage(hList,LB_INSERTSTRING,4,"Hanger")
					SendMessage(hList,LB_INSERTSTRING,5,"Barrack")
					SendMessage(hList,LB_INSERTSTRING,6,"Barrack2")
					SendMessage(hList,LB_INSERTSTRING,7,"HQ")
					SendMessage(hList,LB_INSERTSTRING,8,"HQ2")
					SendMessage(hList,LB_INSERTSTRING,9,"HQ3")
					SendMessage(hList,LB_INSERTSTRING,10,"SupplyCenter")
					SendMessage(hList,LB_INSERTSTRING,11,"GasTank")
					SendMessage(hList,LB_INSERTSTRING,12,"Box")
					SendMessage(hList,LB_INSERTSTRING,13,"Buoy")
					SendMessage(hList,LB_INSERTSTRING,14,"Dock")
					SendMessage(hList,LB_INSERTSTRING,15,"Bridge")
					SendMessage(hList,LB_INSERTSTRING,16,"Bridge2")
					SendMessage(hList,LB_INSERTSTRING,17,"Trench")
					SendMessage(hList,LB_INSERTSTRING,18,"tree1")
					SendMessage(hList,LB_INSERTSTRING,19,"tree2")
					SendMessage(hList,LB_INSERTSTRING,20,"tree3")
					SendMessage(hList,LB_INSERTSTRING,21,"tree4")
					SendMessage(hList,LB_INSERTSTRING,22,"Jhouse1")
					SendMessage(hList,LB_INSERTSTRING,23,"Jhouse2")
					SendMessage(hList,LB_INSERTSTRING,24,"Jhouse3")
					SendMessage(hList,LB_INSERTSTRING,25,"Ehouse1")
					SendMessage(hList,LB_INSERTSTRING,26,"Ehouse2")
					SendMessage(hList,LB_INSERTSTRING,27,"Ehouse3")
					SendMessage(hList,LB_INSERTSTRING,28,"SHouse1")
					SendMessage(hList,LB_INSERTSTRING,29,"SHouse2")
					SendMessage(hList,LB_INSERTSTRING,30,"Farm1")
					SendMessage(hList,LB_INSERTSTRING,31,"Farm2")
					SendMessage(hList,LB_INSERTSTRING,32,"building1")
					SendMessage(hList,LB_INSERTSTRING,33,"building2")
					SendMessage(hList,LB_INSERTSTRING,34,"building3")
					SendMessage(hList,LB_INSERTSTRING,35,"building4")
					SendMessage(hList,LB_INSERTSTRING,36,"building5")
					SendMessage(hList,LB_INSERTSTRING,37,"building6")
					SendMessage(hList,LB_INSERTSTRING,38,"HighRise1")
					SendMessage(hList,LB_INSERTSTRING,39,"HighRise2")
					SendMessage(hList,LB_INSERTSTRING,40,"HighRise3")
					SendMessage(hList,LB_INSERTSTRING,41,"HighRise4")
					SendMessage(hList,LB_INSERTSTRING,42,"Factory1")
					SendMessage(hList,LB_INSERTSTRING,43,"Factory2")
					SendMessage(hList,LB_INSERTSTRING,44,"Factory3")
					SendMessage(hList,LB_INSERTSTRING,45,"Factory4")
		End Select
	End If
End Sub

Sub MainWnd_ComboBox2_SelChange()
	Dim hList As HWND
	Dim Data As String
    Dim data As String

	hList=GetDlgItem(hMainWnd,ListBox1)
	GetDlgItemTextStr(hMainWnd,ComboBox1,Data)

	Select Case Data
		Case "戦闘機"
			GetDlgItemTextStr(hMainWnd,ComboBox2,data)
			If data="大日本帝国" Then
				SendMessage(hList,LB_RESETCONTENT,0,0)
				SendMessage(hList,LB_INSERTSTRING,0,"TYPE97")
				SendMessage(hList,LB_INSERTSTRING,1,"TYPE1")
				SendMessage(hList,LB_INSERTSTRING,2,"ZERO21")
				SendMessage(hList,LB_INSERTSTRING,3,"SHOKI")
				SendMessage(hList,LB_INSERTSTRING,4,"TORYU")
				SendMessage(hList,LB_INSERTSTRING,5,"GEKKO")
				SendMessage(hList,LB_INSERTSTRING,6,"HIEN")
				SendMessage(hList,LB_INSERTSTRING,7,"ZERO52")
				SendMessage(hList,LB_INSERTSTRING,8,"SIDEN")
				SendMessage(hList,LB_INSERTSTRING,9,"RAIDEN")
				SendMessage(hList,LB_INSERTSTRING,10,"HAYATE")
				SendMessage(hList,LB_INSERTSTRING,11,"SHOKI2")
				SendMessage(hList,LB_INSERTSTRING,12,"JINPU")
				SendMessage(hList,LB_INSERTSTRING,13,"TENRAI")
				SendMessage(hList,LB_INSERTSTRING,14,"SIDEN21")
				SendMessage(hList,LB_INSERTSTRING,15,"TYPE5")
				SendMessage(hList,LB_INSERTSTRING,16,"REPPU")
				SendMessage(hList,LB_INSERTSTRING,17,"KI83")
				SendMessage(hList,LB_INSERTSTRING,18,"SINDEN")
				SendMessage(hList,LB_INSERTSTRING,19,"SHUSUI")
			ElseIf data="アメリカ合衆国" Then
				SendMessage(hList,LB_RESETCONTENT,0,0)
				SendMessage(hList,LB_INSERTSTRING,0,"P36")
				SendMessage(hList,LB_INSERTSTRING,1,"F2A")
				SendMessage(hList,LB_INSERTSTRING,2,"P38")
				SendMessage(hList,LB_INSERTSTRING,3,"P40")
				SendMessage(hList,LB_INSERTSTRING,4,"F4F3")
				SendMessage(hList,LB_INSERTSTRING,5,"P39")
				SendMessage(hList,LB_INSERTSTRING,6,"F4F4")
				SendMessage(hList,LB_INSERTSTRING,7,"P43")
				SendMessage(hList,LB_INSERTSTRING,8,"P51C")
				SendMessage(hList,LB_INSERTSTRING,9,"P38L")
				SendMessage(hList,LB_INSERTSTRING,10,"F6F3")
				SendMessage(hList,LB_INSERTSTRING,11,"F6F5")
				SendMessage(hList,LB_INSERTSTRING,12,"P47D")
				SendMessage(hList,LB_INSERTSTRING,13,"P51D")
				SendMessage(hList,LB_INSERTSTRING,14,"F4U")
				SendMessage(hList,LB_INSERTSTRING,15,"P61")
				SendMessage(hList,LB_INSERTSTRING,16,"P63")
				SendMessage(hList,LB_INSERTSTRING,17,"F8F")
				SendMessage(hList,LB_INSERTSTRING,18,"XF5U")
			ElseIf data="ドイツ第三帝国" Then
				SendMessage(hList,LB_RESETCONTENT,0,0)
				SendMessage(hList,LB_INSERTSTRING,0,"Bf109e")
				SendMessage(hList,LB_INSERTSTRING,0,"Bf110E")
				SendMessage(hList,LB_INSERTSTRING,0,"Bf109f")
				SendMessage(hList,LB_INSERTSTRING,0,"Fw190A")
				SendMessage(hList,LB_INSERTSTRING,0,"Bf109g")
				SendMessage(hList,LB_INSERTSTRING,0,"Fw190D")
				SendMessage(hList,LB_INSERTSTRING,0,"Ju88G")
				SendMessage(hList,LB_INSERTSTRING,0,"Me410")
				SendMessage(hList,LB_INSERTSTRING,0,"Me262A")
				SendMessage(hList,LB_INSERTSTRING,0,"Ta152H")
				SendMessage(hList,LB_INSERTSTRING,0,"Me163")
				SendMessage(hList,LB_INSERTSTRING,0,"Bf109k")
				SendMessage(hList,LB_INSERTSTRING,0,"He162")
				SendMessage(hList,LB_INSERTSTRING,0,"Do335")
			ElseIf data="イギリス王国" Then
			End If
		Case "小型爆撃機"
			SendMessage(hList,LB_RESETCONTENT,0,0)
			SendMessage(hList,LB_INSERTSTRING,0,"test1")
		Case "大型爆撃機"
			SendMessage(hList,LB_RESETCONTENT,0,0)
			SendMessage(hList,LB_INSERTSTRING,0,"test2")
		Case "輸送機"
			SendMessage(hList,LB_RESETCONTENT,0,0)
			SendMessage(hList,LB_INSERTSTRING,0,"Error")
		Case "艦船"
			SendMessage(hList,LB_RESETCONTENT,0,0)
			SendMessage(hList,LB_INSERTSTRING,0,"TBoat")
			SendMessage(hList,LB_INSERTSTRING,1,"Destroyer")
			SendMessage(hList,LB_INSERTSTRING,2,"Cruiser")
			SendMessage(hList,LB_INSERTSTRING,3,"BattleShip")
			SendMessage(hList,LB_INSERTSTRING,4,"Carrier")
			SendMessage(hList,LB_INSERTSTRING,5,"LCarrier")
			SendMessage(hList,LB_INSERTSTRING,6,"OilTanker")
			SendMessage(hList,LB_INSERTSTRING,7,"TroopShip")
			SendMessage(hList,LB_INSERTSTRING,8,"AACruiser")
			SendMessage(hList,LB_INSERTSTRING,9,"Dreadnaught")
	End Select
End Sub

Sub MainWnd_ListBox1_SelChange()
	Dim pos As Long 
	pos = SendMessage(GetDlgItem(hMainWnd,ListBox1),LB_GETCURSEL,0,0) 
	Dim Data As String 
	GetListBoxStr(GetDlgItem(hMainWnd,ListBox1),pos,Data)
	SetDlgItemText(hMainWnd,EditBox2,Data)
End Sub

Sub MainWnd_ListBox1_DblClick()
	Dim pos As Long
	Dim Data As String

	pos = SendDlgItemMessage(hMainWnd,ListBox1,LB_GETCURSEL,0,0)
	GetListBoxStr(GetDlgItem(hMainWnd,ListBox1),pos,Data)
	AddEditBoxText(hMainWnd,EditBox1,Data)
End Sub

'hEditはグローバル変数
Sub MainWnd_IDM_NEW_MenuClick()
	Dim cancel As Integer
	If fChanged Then
		' 保存するかユーザーに訊く。
        Dim ret As Long
        ret = MessageBox(hMainWnd, "内容が変更されています。保存しますか？", "AppendMissionEditor", MB_YESNOCANCEL or MB_ICONEXCLAMATION)
        Select Case ret
            Case IDYES
                file_OverWrite()

                'hEditとファイルパスの初期化
                file_path=""
                SetWindowText(hEdit,"")

                fChanged=0
            Case IDNO
                'hEditとファイルパスの初期化
                file_path=""
                SetWindowText(hEdit,"")

                fChanged=0
            Case IDCANCEL
                cancel = 0
        End Select
    End If

    file_path=""
    SetDlgItemText(hMainWnd,EditBox1,NULL)
    NameFile=""
    SetWindowText(hMainWnd,"新規アペンドミッション - AppendMissionEditor")
    fChanged=0

    UpdateWindow(GetDlgItem(hMainWnd,EditBox1))
End Sub

Sub MainWnd_IDM_OPEN_MenuClick()
    Dim hEdit As Long
    Dim ofn As OPENFILENAME
    Dim hFile As Long
    Dim dwFileSize As DWord
    Dim dwAccessByte As DWord
    Dim buffer As BytePtr

    'OPENFILENAME構造体の初期化
    FillMemory(VarPtr(ofn),Len(ofn),0)
    ofn.lStructSize=Len(ofn)
    ofn.hwndOwner=hMainWnd
    ofn.lpstrFilter=Ex"AppendMissionFiles\0*.apm\0テキストファイル\0*.txt\0すべてのファイル(*.*)\0*\0\0"
    ofn.nFilterIndex=1
    ofn.lpstrFile=FileName
    ofn.nMaxFile=MAX_PATH
    ofn.lpstrTitle="ファイルを開く"
    ofn.Flags=OFN_FILEMUSTEXIST or OFN_HIDEREADONLY or OFN_PATHMUSTEXIST or OFN_EXPLORER or OFN_NOCHANGEDIR
    ofn.lpstrDefExt="*"

    Dim cancel As Integer
	If fChanged Then
		' 保存するかユーザーに訊く。
        Dim ret As Long
        ret = MessageBox(hMainWnd, "内容が変更されています。保存しますか？", "AppendMissionEditor", MB_YESNOCANCEL or MB_ICONEXCLAMATION)
        Select Case ret
            Case IDYES
                file_OverWrite()
                file_path=""
                SetWindowText(hEdit,"")
                fChanged=0
            Case IDNO
                cancel=0
            Case IDCANCEL
                Exit Sub
        End Select
    	End If

    '「ファイルを開く」ダイアログ ボックスを表示
    If GetOpenFileName(ofn)=0 Then Exit Sub

    '-------------------
    ' ファイル オープン
    '-------------------
    hFile=CreateFile(ofn.lpstrFile, GENERIC_READ, FILE_SHARE_READ or FILE_SHARE_WRITE, _
                     ByVal 0, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, 0)
    If hFile=INVALID_HANDLE_VALUE Then
        MessageBox(hMainWnd,"ファイルオープンに失敗","AppendMissionEditor",MB_OK or MB_ICONEXCLAMATION)
        Exit Sub
    End If

    file_path=ofn.lpstrFile

    'ファイルサイズを取得し、バッファを確保する
    dwFileSize=GetFileSize(hFile,0)
    buffer=malloc(dwFileSize+1)

    'ファイルの内容を文字列変数bufferに読み込む
    ReadFile(hFile,buffer,dwFileSize,VarPtr(dwAccessByte),ByVal 0)
    buffer[dwAccessByte]=0

    'ファイル ハンドルを閉じる
    CloseHandle(hFile)

    '-------------------
  
    'OPENFILENAME構造体のDWORD型変数lStructSizeにOPENFILENAME構造体の大きさを代入
    ofn.lStructSize=SizeOf(OPENFILENAME)

    fChanged=0

    'EditBox1のハンドルを取得
    hEdit=GetDlgItem(hMainWnd, EditBox1)

    'hEditにバッファをセットする
    SetWindowText(hEdit,buffer)

    'バッファを解放する
    free(buffer)

    'hEditにフォーカスをセット
    SetFocus(hEdit)

    Dim Title$ As String
	Dim buf(1023) As Byte
	Dim i As Long,j As Long
	For i=0 To 1023
		If FileName(i)=0 then Exit For
		buf(i)=FileName(i)
	Next i
	NameFile=ZeroString(i)
	For j=0 To i-1
		NameFile(j)=buf(j)
	Next j
	Dim FileTopName As String
	FileTopName=GetFileName(NameFile)
	Title$=FileTopName+" - AppendMissionEditor"
	If FileTopName="" then
		Title$="新規アペンドミッション - AppendMissionEditor"
	End If
	SetWindowText(hMainWnd,Title$)
End Sub

Sub MainWnd_IDM_SAVE_MenuClick()
    Dim hEdit As Long
    Dim ofn As OPENFILENAME
    Dim hFile As Long
    Dim length As DWord
    Dim dwAccessByte As DWord
    Dim FileName[MAX_PATH] As Byte
    Dim buffer As String

    'OPENFILENAME構造体の初期化
    FillMemory(VarPtr(ofn),Len(ofn),0)
    ofn.lStructSize=Len(ofn)
    ofn.hwndOwner=hMainWnd
    ofn.lpstrFilter=Ex"AppendMissionFiles\0*.apm\0すべてのファイル(*.*)\0*\0\0"
    ofn.nFilterIndex=1
    ofn.lpstrFile=FileName
    ofn.nMaxFile=MAX_PATH
    ofn.lpstrTitle="ファイルの保存"
    ofn.Flags=OFN_FILEMUSTEXIST or OFN_HIDEREADONLY or OFN_PATHMUSTEXIST or OFN_EXPLORER or OFN_NOCHANGEDIR or OFN_OVERWRITEPROMPT
    ofn.lpstrDefExt="*"
    
    '「ファイルの保存」ダイアログ ボックスを表示
    If GetSaveFileName(ofn)=0 Then Exit Sub

    'EditBox1のハンドルを取得
    hEdit=GetDlgItem(hMainWnd, EditBox1)

    'テキスト データを格納するためのバッファ領域を確保
    length=GetWindowTextLength(hEdit)
    buffer=ZeroString(length+1)

    'テキスト バッファを取得
    GetWindowText(hEdit, buffer, length+1)


    '----------------
    ' ファイルへ保存
    '----------------

    hFile=CreateFile(ofn.lpstrFile, GENERIC_WRITE, 0, _
                     ByVal 0, CREATE_ALWAYS, FILE_ATTRIBUTE_NORMAL, 0)
    If hFile=INVALID_HANDLE_VALUE Then
        MessageBox(hMainWnd,"ファイルオープンに失敗","AppendMissionEditor",MB_OK or MB_ICONEXCLAMATION)
        Exit Sub
    End If


    '書き込む
    WriteFile(hFile,buffer,length,VarPtr(dwAccessByte),ByVal 0)

    fChanged=0

    'ファイル ハンドルを閉じる
    CloseHandle(hFile)
End Sub 

Sub MainWnd_IDM_FILEOVERWRITE_MenuClick()
    file_OverWrite()
End Sub

Sub MainWnd_IDM_EXIT_MenuClick()
	SendMessage(hMainWnd,WM_CLOSE,0,0)
End Sub

Sub MainWnd_IDM_UNDO_MenuClick()
    SendMessage(GetDlgItem(hMainWnd,EditBox1), WM_UNDO,0,0)
End Sub

Sub MainWnd_IDM_CUT_MenuClick()
    SendMessage(GetDlgItem(hMainWnd,EditBox1), WM_CUT,0,0)
End Sub

Sub MainWnd_IDM_COPY_MenuClick()
    SendMessage(GetDlgItem(hMainWnd,EditBox1), WM_COPY,0,0)
End Sub

Sub MainWnd_IDM_PASTE_MenuClick()
    SendMessage(GetDlgItem(hMainWnd,EditBox1), WM_PASTE,0,0)
End Sub

Sub MainWnd_IDM_ALLSELECT_MenuClick()
    Dim hEdit As Long
    Dim length As Long

    'EditBox1のハンドルを取得
    hEdit=GetDlgItem(hMainWnd,EditBox1)

    'テキスト データの長さを取得
    length=GetWindowTextLength(hEdit)

    'すべての部分を選択する
    SendMessage(hEdit,EM_SETSEL,0,length)
End Sub

Sub MainWnd_IDM_COLOR_MenuClick()
	Dim chc As *CHOOSECOLOR    ' ダイアログ情報を管理する
	Dim buf[16] As DWord    ' ユーザーが作った色を残しておきたいならグローバルにする

    ' カラー選択ダイアログの表示に必要な情報をセット
    chc=calloc(SizeOf(CHOOSECOLOR))
    chc->lStructSize=SizeOf(CHOOSECOLOR)
    chc->hwndOwner=hMainWnd
    chc->lpCustColors=VarPtr(buf)
    chc->rgbResult=rgb

    ' カラー選択ダイアログの表示
    If ChooseColor(ByVal chc) Then
        ' ユーザーが色を指定したなら rgb に代入
        rgb=chc->rgbResult
    End If

    free(chc)
End Sub

Sub MainWnd_IDM_TOPIC_MenuClick()
	Exec"AppendMissionEditor.chm"
End Sub

Sub MainWnd_IDM_ABOUT_MenuClick()
    DialogBox(hMainWnd,"ABOUT")
End Sub

Sub MainWnd_IDM_SENDMAIL_MenuClick()
    '「メールで送信」ダイアログボックスを開く
    DialogBox(hMainWnd,"SendMail")
End Sub

Sub MainWnd_IDM_SETEXT_MenuClick()
Dim hKey As HKEY,hExtKey As HKEY,Ret As DWord,AppFile[ELM(MAX_PATH)] As Byte,AppFile2[ELM(MAX_PATH)] As Byte
Dim FileType As String,FileTypeLen As DWord
Dim hSubKey[2] As HKEY
Dim dwAppLen As DWord
	'関連付けはされているか？
	RegCreateKeyEx(HKEY_CLASSES_ROOT As HKEY,"AppendMissionFile",0,NULL,REG_OPTION_NON_VOLATILE,KEY_QUERY_VALUE Or KEY_SET_VALUE Or KEY_CREATE_SUB_KEY,ByVal NULL,hKey,VarPtr(Ret))
	If Ret=REG_CREATED_NEW_KEY Then
		'関連付けはされていない
		'OrangeArchiverFile[既定]
		RegSetValueEx(hKey,"",0,REG_SZ,"Append ミッションファイル",28)
		'OrangeArchiverFile\DefaultIcon[既定]
		RegCreateKeyEx(hKey,"DefaultIcon",0,NULL,REG_OPTION_NON_VOLATILE,KEY_SET_VALUE,ByVal NULL,hSubKey[0],NULL)
		GetModuleFileName(0,AppFile2,MAX_PATH)
		'長いファイル名に戻す
		dwAppLen=lstrlen(AppFile)
		
		lstrcat(AppFile,",4")
		RegSetValueEx(hSubKey[0],"",0,REG_SZ,AppFile,dwAppLen+3)
		RegCloseKey(hSubKey[0])
		'OrangeArchiverFile\shell
		RegCreateKeyEx(hKey,"shell",0,NULL,REG_OPTION_NON_VOLATILE,KEY_CREATE_SUB_KEY,ByVal NULL,hSubKey[0],NULL)
		'OrangeArchiverFile\shell\open
		RegCreateKeyEx(hSubKey[0],"open",0,NULL,REG_OPTION_NON_VOLATILE,KEY_CREATE_SUB_KEY,ByVal NULL,hSubKey[1],NULL)
		'OrangeArchiverFile\shell\open\command[既定]
		RegCreateKeyEx(hSubKey[1],"command",0,NULL,REG_OPTION_NON_VOLATILE,KEY_SET_VALUE,ByVal NULL,hSubKey[2],NULL)
		AppFile[dwAppLen]=0
		lstrcat(AppFile,Ex" \q%1\q")
		RegSetValueEx(hSubKey[2],"",0,REG_SZ,AppFile,dwAppLen+6)
		RegCloseKey(hSubKey[2])
		RegCloseKey(hSubKey[1])
		RegCloseKey(hSubKey[0])

		RegCreateKeyEx(HKEY_CLASSES_ROOT As HKEY,".apm",0,NULL,REG_OPTION_NON_VOLATILE,KEY_QUERY_VALUE Or KEY_SET_VALUE,ByVal NULL,hExtKey,VarPtr(Ret))
		If Ret=REG_CREATED_NEW_KEY Then
			'.oarに何も関連付けられていない
			RegSetValueEx(hExtKey,"",0,REG_SZ,"AppendMissionFile",28)
			RegCloseKey(hExtKey)
		Else
			'.oarに関連付けられたアプリケーションがある
			RegQueryValueEx(hExtKey,"",0,NULL,NULL,VarPtr(FileTypeLen))
			FileType=ZeroString(FileTypeLen)
			RegQueryValueEx(hExtKey,"",0,NULL,StrPtr(FileType),VarPtr(FileTypeLen))
			RegSetValueEx(hExtKey,"",0,REG_SZ,"AppendMissionFile",28)
			RegCloseKey(hExtKey)
			RegSetValueEx(hKey,"",0,REG_SZ,"Append ミッションファイル",28)
			RegSetValueEx(hKey,"AME",0,REG_SZ,StrPtr(FileType),lstrlen(FileType)+1)

			RegCloseKey(hKey)
		End If

		MessageBox(hMainWnd,Ex"[.apm]をAppendMissionEditorに関連付けました。\r\nもし[.apm]ファイルを直接開けない場合は、Windowsを再起動してください。","関連付けの設定",MB_ICONINFORMATION)
	Else
		RegCreateKeyEx(HKEY_CLASSES_ROOT As HKEY,".apm",0,NULL,REG_OPTION_NON_VOLATILE,KEY_QUERY_VALUE Or KEY_SET_VALUE,ByVal NULL,hExtKey,NULL)
		'関連付けがされている
		If RegQueryValueEx(hKey,"AME",0,NULL,NULL,VarPtr(FileTypeLen))=ERROR_SUCCESS Then
			FileType=ZeroString(FileTypeLen)
			RegQueryValueEx(hKey,"AME",0,NULL,StrPtr(FileType),VarPtr(FileTypeLen))

			RegCreateKeyEx(HKEY_CLASSES_ROOT As HKEY,".apm",0,NULL,REG_OPTION_NON_VOLATILE,KEY_SET_VALUE,ByVal NULL,hExtKey,NULL)
			RegSetValueEx(hExtKey,"",0,REG_SZ,StrPtr(FileType),lstrlen(FileType)+1)
			RegCloseKey(hExtKey)
		Else
			'元々関連付けられたアプリケーションはない。
			RegCloseKey(hExtKey)
			RegDeleteKey(HKEY_CLASSES_ROOT As HKEY,".apm")
		End If

		RegDeleteKey(hKey,"shell\open\command")
		RegDeleteKey(hKey,"shell\open")
		RegDeleteKey(hKey,"shell")
		RegDeleteKey(hKey,"DefaultIcon")
		RegCloseKey(hKey)
		RegDeleteKey(HKEY_CLASSES_ROOT As HKEY,"AppendMissionFile")

		MessageBox(hMainWnd,Ex"[.apm]への関連付けを解除しました。","関連付けの解除",MB_ICONINFORMATION)
	End If
	RefreshExt()
End Sub

Sub MainWnd_QueryClose(ByRef cancel As Integer)
    ' エディットボックスの内容が変更されているかどうか
    If fChanged Then
        ' 保存するかユーザーに訊く。
        Dim ret As Long
        Dim letter As String
        letter= NameFile + Ex"\r\n" + Ex"\r\n" + Ex"ファイルの内容が変更されています。保存しますか？\r\n"
        ret = MessageBox(hMainWnd,letter,"AppendMissionEditor", MB_YESNOCANCEL or MB_ICONEXCLAMATION or MB_DEFBUTTON1)
        Select Case ret
            Case IDYES
                file_OverWrite()
            Case IDNO
                Exit Sub
            Case IDCANCEL
                cancel = 1
        End Select
    End If
End Sub

Sub MainWnd_DropFiles(hDrop As Long)
    'FileName配列にファイルパスを格納
    Dim FileName[MAX_PATH-1] As Byte
    DragQueryFile(hDrop,0,FileName,MAX_PATH)

    'ドラッグ＆ドロップに関する情報を解放
    DragFinish(hDrop)


    '-------------------
    ' ファイル オープン
    '-------------------
    Dim hFile As Long
    Dim dwFileSize As DWord
    Dim dwAccessByte As DWord
    Dim buffer As BytePtr

    hFile=CreateFile(FileName, GENERIC_READ, FILE_SHARE_READ or FILE_SHARE_WRITE, _
                     ByVal 0, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, 0)
    If hFile=INVALID_HANDLE_VALUE Then
        MessageBox(hMainWnd,"ファイルオープンに失敗","AppendMissionEditor",MB_OK or MB_ICONEXCLAMATION)
        Exit Sub
    End If

    'ファイルサイズを取得し、バッファを確保する
    dwFileSize=GetFileSize(hFile,0)
    buffer=malloc(dwFileSize+1)

    'ファイルの内容を文字列変数bufferに読み込む
    ReadFile(hFile,buffer,dwFileSize,VarPtr(dwAccessByte),ByVal 0)

    'ファイル ハンドルを閉じる
    CloseHandle(hFile)

    '-------------------


    'EditBox1のハンドルを取得
    Dim hEdit As Long
    hEdit=GetDlgItem(hMainWnd, EditBox1)

    'hEditにバッファをセットする
    SetWindowText(hEdit,buffer)

    'バッファを解放する
    free(buffer)

    'hEditにフォーカスをセット
    SetFocus(hEdit)
End Sub

Sub MainWnd_Notify(ByRef nmHdr As NMHDR)
    Dim pToolTipText As *TOOLTIPTEXT

    If nmHdr.code=TTN_NEEDTEXT Then
        pToolTipText=calloc(SizeOf(TOOLTIPTEXT))
        memcpy(pToolTipText,VarPtr(nmHdr),SizeOf(TOOLTIPTEXT))
        Select Case nmHdr.idFrom
            Case IDM_NEW
                pToolTipText->lpszText="新規作成(&N)"
            Case IDM_OPEN
                pToolTipText->lpszText="開く(&O)"
            Case IDM_SAVE
                pToolTipText->lpszText="保存(&S)"
            Case IDM_FILEOVERWRITE
                pToolTipText->lpszText="上書き保存(&F)"
            Case IDM_CUT
                pToolTipText->lpszText="切り取り(&C)"
            Case IDM_COPY
                pToolTipText->lpszText="コピー"
            Case IDM_PASTE
                pToolTipText->lpszText="貼り付け"
            Case IDM_UNDO
                pToolTipText->lpszText="元に戻す"
            Case IDM_SENDMAIL
                pToolTipText->lpszText="メールで送信"
        End Select
        memcpy(VarPtr(nmHdr),pToolTipText,SizeOf(TOOLTIPTEXT))        
        free(pToolTipText)
    End If
End Sub

Sub MainWnd_CommandButton1_Click()
    DialogBox(hMainWnd,"Mission")
End Sub

Sub MainWnd_CommandButton2_Click()
    AddEditBoxText(hMainWnd,EditBox1,Ex"[PlayerUnit]\r\n")
    Dim hEdit As HWND
    hEdit=GetDlgItem(hMainWnd,EditBox1)
    SendMessage(hEdit,EM_SETSEL,GetWindowTextLength(hEdit),-1)
    SendMessage(hEdit,EM_REPLACESEL,TRUE,Ex"Block=\r\n")
    SendMessage(hEdit,EM_REPLACESEL,TRUE,Ex"Sector=\r\n")
    SendMessage(hEdit,EM_REPLACESEL,TRUE,Ex"Factor=\r\n")
End Sub


Sub MainWnd_CommandButton3_Click()
    AddEditBoxText(hMainWnd,EditBox1,Ex"[Camp1]\r\n")
    Dim hEdit As HWND
    hEdit=GetDlgItem(hMainWnd,EditBox1)
    SendMessage(hEdit,EM_SETSEL,GetWindowTextLength(hEdit),-1)
    SendMessage(hEdit,EM_REPLACESEL,TRUE,Ex"WinCond=\r\n")
    SendMessage(hEdit,EM_REPLACESEL,TRUE,Ex"Escape=\r\n")
    SendMessage(hEdit,EM_REPLACESEL,TRUE,Ex"Wave1_comment=\r\n")
    SendMessage(hEdit,EM_REPLACESEL,TRUE,Ex"Wave2_comment=\r\n")
    SendMessage(hEdit,EM_REPLACESEL,TRUE,Ex"Wave2_time=\r\n")
    SendMessage(hEdit,EM_REPLACESEL,TRUE,Ex"Wave3_comment=\r\n")
    SendMessage(hEdit,EM_REPLACESEL,TRUE,Ex"Wave3_time=\r\n")
    SendMessage(hEdit,EM_REPLACESEL,TRUE,Ex"Wave4_comment=\r\n")
    SendMessage(hEdit,EM_REPLACESEL,TRUE,Ex"Wave4_time=\r\n")
    SendMessage(hEdit,EM_REPLACESEL,TRUE,Ex"Wave5_comment=\r\n")
    SendMessage(hEdit,EM_REPLACESEL,TRUE,Ex"Wave5_time=\r\n")
    SendMessage(hEdit,EM_REPLACESEL,TRUE,Ex";必要に応じてWave6以下は入力してください。\r\n")
    SendMessage(hEdit,EM_REPLACESEL,TRUE,Ex"WinComment=\r\n")
    SendMessage(hEdit,EM_REPLACESEL,TRUE,Ex"SplashEnemyPer=SplashTargetPer=\r\n")
    SendMessage(hEdit,EM_REPLACESEL,TRUE,Ex"SplashTargetPer=\r\n")
    SendMessage(hEdit,EM_REPLACESEL,TRUE,Ex"EscFriendTargetPer=\r\n")
End Sub

Sub MainWnd_CommandButton4_Click()
    AddEditBoxText(hMainWnd,EditBox1,Ex"[Camp2]\r\n")
    Dim hEdit As HWND
    hEdit=GetDlgItem(hMainWnd,EditBox1)
    SendMessage(hEdit,EM_SETSEL,GetWindowTextLength(hEdit),-1)
    SendMessage(hEdit,EM_REPLACESEL,TRUE,Ex"WinCond=Escape=\r\n")
    SendMessage(hEdit,EM_REPLACESEL,TRUE,Ex"Escape=\r\n")
    SendMessage(hEdit,EM_REPLACESEL,TRUE,Ex"Wave2_comment=\r\n")
    SendMessage(hEdit,EM_REPLACESEL,TRUE,Ex"Wave2_time=\r\n")
    SendMessage(hEdit,EM_REPLACESEL,TRUE,Ex"Wave3_comment=\r\n")
    SendMessage(hEdit,EM_REPLACESEL,TRUE,Ex"Wave3_time=\r\n")
    SendMessage(hEdit,EM_REPLACESEL,TRUE,Ex"Wave4_comment=\r\n")
    SendMessage(hEdit,EM_REPLACESEL,TRUE,Ex"Wave4_time=\r\n")
    SendMessage(hEdit,EM_REPLACESEL,TRUE,Ex"Wave5_comment=\r\n")
    SendMessage(hEdit,EM_REPLACESEL,TRUE,Ex"Wave5_time=\r\n")
    SendMessage(hEdit,EM_REPLACESEL,TRUE,Ex";必要に応じてWave6以下は入力してください。\r\n")
    SendMessage(hEdit,EM_REPLACESEL,TRUE,Ex"WinComment=\r\n")
    SendMessage(hEdit,EM_REPLACESEL,TRUE,Ex"SplashEnemyPer=\r\n")
    SendMessage(hEdit,EM_REPLACESEL,TRUE,Ex"SplashTargetPer=\r\n")
    SendMessage(hEdit,EM_REPLACESEL,TRUE,Ex"EscFriendTargetPer=\r\n")
End Sub

Sub MainWnd_CommandButton5_Click()
	DialogBox(hMainWnd,"UnitSet")
End Sub

>

バグっていると思われるコード [ここをクリックすると内容が表示されます]

コード: 全て選択

'hEditはグローバル変数
> Sub MainWnd_IDM_NEW_MenuClick()
> 	Dim cancel As Integer
> 	If fChanged Then
> 		' 保存するかユーザーに訊く。
>         Dim ret As Long
>         ret = MessageBox(hMainWnd, "内容が変更されています。保存しますか？", "AppendMissionEditor", MB_YESNOCANCEL or MB_ICONEXCLAMATION)
>         Select Case ret
>             Case IDYES
>                 file_OverWrite()
> 
>                 'hEditとファイルパスの初期化
>                 file_path=""
>                 SetWindowText(hEdit,"")
> 
>                 fChanged=0
>             Case IDNO
>                 'hEditとファイルパスの初期化
>                 file_path=""
>                 SetWindowText(hEdit,"")
> 
>                 fChanged=0
>             Case IDCANCEL
>                 cancel = 0
>         End Select
>     End If
> 
>     file_path=""
>     SetDlgItemText(hMainWnd,EditBox1,NULL)
>     NameFile=""
>     SetWindowText(hMainWnd,"新規アペンドミッション - AppendMissionEditor")
>     fChanged=0
> End Sub

>
> コンパイル、デバッグともひかかりませんが、実行したときにEditBox1が空になりません。間違ってはいないと思うのですが、なぜでしょう？

コード: 全て選択

SetDlgItemText(hMainWnd,EditBox1,"")

の間違いではないですよね。

コード: 全て選択

SetWindowText(hEdit,"")

でも同じです。
関数が違ってもする動作は同じなので・・・。

コード: 全て選択

'hEditはグローバル変数
Sub MainWnd_IDM_NEW_MenuClick()
	Dim cancel As Integer
	If fChanged Then
		' 保存するかユーザーに訊く。
        Dim ret As Long
        ret = MessageBox(hMainWnd, "内容が変更されています。保存しますか？", "AppendMissionEditor", MB_YESNOCANCEL or MB_ICONEXCLAMATION)
        Select Case ret
            Case IDYES
                file_OverWrite()

                'hEditとファイルパスの初期化
                SetWindowText(hEdit,"")
                file_path=""

                fChanged=0
            Case IDNO
                'hEditとファイルパスの初期化
                SetWindowText(hEdit,"")
                file_path=""
                
                fChanged=0
            Case IDCANCEL
                cancel = 0
        End Select
    End If

    SetDlgItemText(hMainWnd,EditBox1,"")
    file_path=""
    NameFile=""
    SetWindowText(hMainWnd,"新規アペンドミッション - AppendMissionEditor")
    fChanged=0

    UpdateWindow(GetDlgItem(hMainWnd,EditBox1))
End Sub

このように訂正しましたら直りました。
お騒がせいたしました。

ab.com コミュニティ

バグ発生？

バグ発生？

説明不足

Re: バグ発生？